SH64
January 1st, 1970, 01:00 AM
Yesterday i was messing around Boiling Point to get SLI to work in any form possible & finally i found a profile that works!
* using nHancer .. set the AFR2 compatability bits as following : 07,13,31
OR
* using nVIDIA drviers profiles set the value to : "80002081"
- notes :
1) The SLI improvements should be obvious in the forests (before this profile i was getting 25min,35av fps / after 35+min,45+av!).. however in the cities my performance remained the same & in best cases a slight increase in fps.
2) to get the best experiance i recommend setting the "Grass Distance" to 50%-60% . turning it to 100% would still cause a serious fps drop even with SLI.
all other options should run fine at max though :)
& always remember that you are going to need 2GB of RAM for smoothest experiance possible with current gen of hardware.
provided by SH64.
* using nHancer .. set the AFR2 compatability bits as following : 07,13,31
OR
* using nVIDIA drviers profiles set the value to : "80002081"
- notes :
1) The SLI improvements should be obvious in the forests (before this profile i was getting 25min,35av fps / after 35+min,45+av!).. however in the cities my performance remained the same & in best cases a slight increase in fps.
2) to get the best experiance i recommend setting the "Grass Distance" to 50%-60% . turning it to 100% would still cause a serious fps drop even with SLI.
all other options should run fine at max though :)
& always remember that you are going to need 2GB of RAM for smoothest experiance possible with current gen of hardware.
provided by SH64.